A few months ago, I decided to create my own cute japonese stationery.
I wanted a cute stationery that was fun to make, and one that I could make in just a few hours.
The results were pretty amazing.
My stationery is called Hello Kitty!
I’m sharing the finished product with you here for your enjoyment.
I hope you enjoy it as much as I enjoyed creating it.
You can download the finished piece here.
The first step was to get my favorite Hello Kitty toy to work with my stationery station.
It was a pain in the neck, but it’s not too hard.
You’ll need: * A box cutter (I used a kitchen knife, but you can use any flat object) * A plastic pen * A small ruler * A piece of paper * A pencil The box cutter works best.
You could also use a circular saw.
You don’t want the sides of the box cut out, so you’ll have to trim the sides off the box cutter.
Next, use the boxcutter to cut the sides and sides of a piece of plastic.
You should end up with two pieces of plastic: one on each side of the piece of cardboard.
Then, cut the two pieces into little pieces.
I used a piece that had the same width as the piece that I cut off, and cut the pieces in half.
I then taped them together with a piece I had lying around.
Next I glued the pieces together using tape.
Next step was a lot of trial and error.
I tried using the pencil to make the stationery shapes, but that didn’t work well.
I decided instead to use the pencil on the side of a pen, and then just cut the pencil out with a ruler.
Once the stationeries were glued together, I glued them to the box, but they didn’t hold.
So I had to make them out of something else.
The only solution I found was a little piece of scrap cardboard that I had laying around.
I put some tape on it and cut out a bunch of stations with it.
Then I glued it to the cardboard.
After the stationers were glued, I filled them with Hello Kitty stickers and put them in the box.
Then it was time to make my stationer paper.
I made the stationer from scrap cardboard and put it on a paper towel.
The next step was adding Hello Kitty to the station.
I filled the station with Hello Kitten stickers and placed the paper towel on top.
Then after that, I cut the station paper into small squares and put Hello Kitty inside.
After that, it was just a matter of filling the paper towels with Hello Mums and Hello Kitty and putting it in the station for my stationers to decorate.
Here’s a close-up of my Hello Kitty stationery piece: